As is the case with automobile and home lighting systems, LED lighting systems for saltwater aquariums have grown to be remarkably popular among aquarists during the last few years. These systems involve some very good points for them, especially if you invest in a quality light strip. But there are also some issues to be aware of when using LED lighting in your aquarium.
The Advantages of LED Lighting for Aquariums
LED lighting systems are more cost effective in two ways. First, an LED bulb provides seven to eight times more wattage per bulb than other kinds of aquarium lighting, such as for instance halide and T5HO bulbs. What this implies is that you will get the exact same amount of light from the 30 watt LED bulb as you will see from the 250 watt halide bulb. This will develop a significant savings on your own monthly electric bill. Second, LEDs can last up to 50,000 hours. Although you spend more initially for the LED bulb, may very well not have to displace it for seven years, as weighed against the yearly cost of replacement of a T5HO or halide bulb. The LED aquarium lighting system packs every one of these savings into a small space, because LED systems are more compact than other aquarium lighting.
The caliber of the LED lighting is also a great reason to invest in this system. LED aquarium lighting can deliver up to 10,000K of lighting, that will be enough to stimulate growth in corals and aquarium plants. Also, you have a wide selection of choices in colors by having an LED system LED Linear Light System. When that is along with computer programming, it can create an aquarium that either shimmers like it is situated in the ocean, or the lighting accentuates the colors of the fish and corals for an exceptional show.
What to Try to find within an LED Aquarium Light
One aspect of a great LED aquarium lighting system to consider is whether or not it has ways to cool itself off to be able to extend the life of the LED bulbs. This cooling can either be passive or active. The Maxspect Razor R420R uses an aerodynamic design to naturally draw cooler air from beneath the machine and through the slim body of the fixture to passively cool the lights. In the event of the Ecotech Marine XR30w Pro Gen3 model, a fan is made into the biggest market of the light strip to offer necessary cooling for the LEDs.
Another item to consider when choosing an LED light fixture is the spectrum range of the lights. You would like one’s body to offer the whole light spectrum your plants, animals, and corals need to be able to thrive like they were in their natural habitat. In the event of the AquaIllumination AI Hydra FiftyTwo LED System, your aquarium organisms can receive the full spectrum of light that is greater than visible light. If you feel that might be somewhat much for your setup, AquaIllumination also makes an AI Hydra TwentySix LED system, that has half the bulbs of the FiftyTwo model, but nonetheless uses 80 degree lenses to spread the light to best advantage, as well as providing 90 percent LED optical efficiency.
Items to Avoid When Using LED Aquarium Lights
There are always a few things you will need to be aware of before establishing your personal LED lighting in your aquarium. Heat is one item. Although LED lights don’t release nearly as much heat into an aquarium system as metal halides or T5HO bulbs do, they’re prone to reduced lifespan in the clear presence of heat. Therefore, LEDs shouldn’t be properly used next to halides, fluorescent, or T5HO bulbs, due to the exposure to heat.
Do not get your LED system wet. Although aquarium LED systems are waterproof, they can’t take being dropped into the aquarium. The end result will soon be corrosion and shorting of the circuit board. You also need to regulate the mineral deposits that could develop on LED light systems for the exact same reason. Marine aquarium salts can corrode your light system, unless the salts are cleaned off regularly.
Finally, you will need to introduce LED lights slowly to coral reef aquariums. These lights could be intensely bright. If bright LEDs are introduced too soon, corals can occasionally react to the change by expelling their zooxanthellae, leaving behind a bleached coral with no sign of life.